The Effect of the Introduction of Detonation Nanodiamonds on the Physical and Mechanical Characteristics of Thermoplastic Elastomers

Cover Page

Cite item

Full Text

Open Access Open Access
Restricted Access Access granted
Restricted Access Subscription or Fee Access

Abstract

Thermoplastic elastomers (TPEs) reinforced with detonation nanodiamonds (DNDs) based on styrene-butadiene rubber are developed. The mechanical characteristics of the reinforced compounds with different DND contents are investigated. The developed material shows a 30% increase in compressive strength compared to the unfilled composite and a 10% increase in the tensile strength of the material with the introduction of 0.1% DND.

About the authors

M. V. Timoshenko

Institute of Silicate Chemistry, Russian Academy of Sciences

Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia

S. V. Balabanov

Institute of Silicate Chemistry, Russian Academy of Sciences

Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia

M. M. Sychov

Institute of Silicate Chemistry, Russian Academy of Sciences; St. Petersburg State Institute of Technology (Technical University)

Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia; 190013, St. Petersburg, Russia

K. S. Koshevaya

Institute of Silicate Chemistry, Russian Academy of Sciences

Email: timoshe-mikhail@mail.ru
199034, St. Petersburg, Russia

V. Yu. Dolmatov

Special Design and Technological Bureau “Technologist”

Email: timoshe-mikhail@mail.ru
192076, St. Petersburg, Russia

V. P. Britov

St. Petersburg State Institute of Technology (Technical University)

Author for correspondence.
Email: timoshe-mikhail@mail.ru
190013, St. Petersburg, Russia

References

  1. Banerjee S.S., Bhowmick A.K. High-temperature thermoplastic elastomers from rubber–plastic blends: A state-of-the-art review // Rubber Chem. Technol. 2017. V. 90. P. 1–36.
  2. Banerjee S.S., Bhowmick A.K. Novel nanostructured polyamide 6/fluoroelastomer thermoplastic elastomeric blends: Influence of interaction and morphology on physical properties // Polymer. 2013. V. 54. P. 6561–6571.
  3. Coran A.Y., Patel R. Rubber-Thermoplastic Compositions. Part IV. Thermoplastic Vulcanizates from Various Rubber-Plastic Combinations // Rubber Chem. Technol. 1981. V. 54. P. 892–903.
  4. Banerjee S.S., Kumar K.D., Sikder A.K., Bhowmick A.K. Nanomechanics and Origin of Rubber Elasticity of Novel Nanostructured Thermoplastic Elastomeric Blends Using Atomic Force Microscopy // Macromol. Chem. Phys. 2015. V. 216. P. 1666–1674.
  5. Wang H., Wang Z., Wang X., Wang L., Cai Y., Hong K., Sun L., Lu G., Zhao D., Li Z. Styrene-butadiene-styrene copolymer-compatibilized interfacial-modified graphene oxide with mechanical and electrical properties // J. Thermoplastic Composite Materials. 2017. V. 30. P. 1228–1241.
  6. Hofmann D., Thomann R., Mülhaupt R. (2017). Thermoplastic SEBS Elastomer Nanocomposites Reinforced with Functionalized Graphene Dispersions // Macromolecular Materials and Engineering. 2018. V. 303 P. 1700324.
  7. Amini M., Ramazani S.A.A., Haddadi S.A., Kheradmand A. Mechanical, rheological and oxygen barrier properties of ethylene vinyl acetate/diamond nanocomposites for packaging applications // Diamond and Related Materials. 2019. V. 99. P. 107523.
  8. Ivanoska-Dacikj A. Carbon-Based Nanofiller and Their Rubber Nanocomposites // Fabrication Methods of Carbon-Based Rubber Nanocomposites. 2019. P. 27–47.
  9. Maitra U., Prasad K.E., Ramamurty U., Rao C.N.R. Mechanical properties of nanodiamond reinforced polymer-matrix composites // Solid State Commun. 2009. V. 149 P. 1693–1697.
  10. Ullah M., Kausar A., Siddiq M., Subhan M., Abid Zia M. Reinforcing effects of modified nanodiamonds on the physical properties of polymer-based nanocomposites: A review // Polym – Plast. Technol. Eng. 2015. V. 54. P. 861–879.
  11. Ayatollahi M.R., Alishahi E., Doagou-R.S., Shadlou S. Tribological and mechanical properties of low content nanodiamond/epoxy nanocomposites // Compos. Part B Eng. 2012. V. 43. P. 3425–3430.
  12. Mochalin V.N., Gogotsi Y. Nanodiamond-polymer composites // Diam. Relat. Mater. 2015. V. 58. P. 161–171.
  13. Kuasar A. Structure and chemistry of polymer/nanodiamond composites. Hybrid polymer composite materials applications // Woodhead Publishing. 2017. P. 1–21.
  14. Shenderova O. A. Detonation Nanodiamonds // Science and Applications. 2014. P. 346.
  15. Kislitsyn V.D., Mokhireva K.A., Shadrin V.V., Svistkov A.L. Research and modeling of viscoelastic behavior of elastomeric nanocomposites // PNRPU Mechanics Bulletin. 2021. № 2. P. 76–87.
  16. Shvidchenko A.V., Eidelman E.D., Vul’ A.Ya., Kuznetsov N.M., Stolyarova D.Yu., Belousov S.I., Chvalun S.N. Colloids of detonation nanodiamond particles for advanced applications // Advances in Colloid and Interface Science. 2019. V. 268. P. 64–81.
  17. Бернхардт Э. Переработка термопластичных материалов. М.: Госхимиздат, 1962. 747 с.
  18. Timoshenko M.V., Balabanov S.V., Sychev M.M., Nikiforov D.I. Thermoplastic Elastomer for 3D Printing by Fused Deposition Modeling // Polym. Sci. Ser. A. 2021. V. 63. P. 652–656.
  19. Dolmatov V.Yu. Detonation-synthesis nanodiamonds: synthesis, structure, properties and applications // Russian Chemical Reviews. 2007. V. 76. P. 339–360.
  20. Dolmatov V.Yu. Composition materials based on elastomer and polymer matrices filled with nanodiamonds of detonation synthesis // Nanotechnologies in Russia. 2009. V. 14. P. 556–575.

Supplementary files

Supplementary Files
Action
1. JATS XML
Download
2.

Download (96KB)
Indexing metadata
3.

Download (75KB)
Indexing metadata

Statistics

Views

Abstract: 783

Dimensions

Article Metrics

Metrics Loading ...

PlumX


Copyright (c) 2023 М.В. Тимошенко, С.В. Балабанов, М.М. Сычев, К.С. Кошевая, В.Ю. Долматов, В.П. Бритов